S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Place a container underneath the transmission.
Ensure that the piston rod in the puller cylinder is in the outer position.
Position socket 999 5777 between the puller cylinder and the transmission. Press in the expander so that it enters the channel on the connecting socket.
Apply the puller cylinder. Check that the socket between the transmission and the puller cylinder is in contact with its support surfaces.
Remove the socket.
Removing the sealing ring from the transmission
Use a screwdriver to pry out the seal.
Position drift 999 5779 on the end of the differential to protect the mating surface from damage when removing the seal. Do not damage the surfaces
in the transmission housing.
Removing the sealing ring from the connecting socket
Use a screwdriver to tap the sealing ring out of the socket.