S60 T5 L5-2.3L Turbo VIN 53 B5234T3 (2002)
Remove
-
the screw that holds the inlet pipe for the coolant pump on the cylinder block
-
the two screws for the connection between the coolant pipe and the bypass channel.
Carefully turn the pipe to remove it from the cylinder block.
Removing the camshaft cover and cylinder head
Remove the spark plugs from cylinders 1 and 5.
Install 2 tools 999 5454 PRESS TOOL See: Tools and Equipment/999 5454 Press Tool. Leave a 2-3 mm gap to the camshaft cover.
Make sure that the screw in the spark plug thread is tightened all the way down. VVT-solenoid.
Remove all the screws securing the camshaft cover to the cylinder head.
