S60 T5 L5-2.3L Turbo VIN 53 B5234T3 (2002)
Use pliers 999 5670 Pliers See: Tools and Equipment/999 5670 Pliers to lift the cover from the cylinder head.
Install the pliers at the stop lugs. Start with cylinder 1 and work alternately backward.
Slacken off the wing nuts approximately 2 turns. Repeat the procedure.
Carefully press out the front and rear camshaft seals.
Remove
-
tools 999 5454 PRESS TOOL See: Tools and Equipment/999 5454 Press Tool.
-
the camshaft cover
-
the camshafts
-
the screws holding the cylinder head onto the cylinder block.
Start at the sides and work alternately towards the centre.
Get help to lift off the cylinder head.
Note! Work very carefully to avoid damaging the contact faces.
When replacing or working on the cylinder head
Lift out the tappets. Use a magnet or suction cup.
Note! Keep the tappets in an oil-filled container to avoid self-drainage.