volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Brake Disc, Calibrating|Page 5890 > < Brake Disc, Calibrating|Page 5888
Page 1
background image

Brake Rotor/Disc: Service and Repair
Brake Discs, Replacement

Front Brakes

Replacing front brake discs 

Removal 

Remove the securing spring and locating pins

See Brake pads, front, replacing.

Remove the brake caliper and brake pads

See Brake pads, front replacing.

Remove the caliper holder and the brake disc 

Remove:
-

both the mounting screws (4) for the caliper holder. Remove the holder

-

the locating pin (5) and the brake disc.

Cleaning and inspection 

Note:  Cleaning is important to prevent lateral runout at the brake disc.

Clean the hub flange before installing the new brake disc.
Check the hub. If it is damaged, measure the lateral runout.

Installation

Install the brake disc 

Note:  Be careful when handling the new brake disc. Careless handling can cause damage to the brake disc (out-of-true).

Brake Disc, Calibrating|Page 5890 > < Brake Disc, Calibrating|Page 5888