S70 L5-2.4L VIN 61 B5244S (2000)
Install:
-
the new brake disc. Tighten the locating pin (5). Tighten to 8 Nm
-
the caliper holder. Use new mounting screws (4). Tighten to 100 Nm.
Install the brake pads and brake caliper
See Brake pads, front, replacing.
Install the locating pins in the brake caliper
See Brake pads, front, replacing.
Install the wheel
Installing wheels
Rear Brakes
Replacing rear brake discs
Removal
Remove the panel covering the parking brake lever
See Replacing the parking brake lever.
Release the parking brake adjuster
See Parking brake, brake shoes, replacing.
Remove the caliper holder and the brake disc
Remove:
-
both the mounting screws (4) for the caliper holder.
Remove the holder
-
remove the locating pin (5) and the brake disc.
Cleaning and inspection
Note: Cleaning is important to prevent lateral runout at the brake disc.