S70 L5-2.4L VIN 61 B5244S (2000)
^
Check that dirt guard is in position properly.
^
Install bleed nipple (5), tighten to 9 Nm (7 ft. lbs.).
Finishing
^
Install rubber bushings in brake caliper.
^
Screw brake caliper onto hose by hand.
^
Hang brake caliper up on a steel wire on front spring to avoid damaging hose.
^
Go to Front brake pads, replacement
Rear Calipers
Brake caliper rear, overhaul
Special tools: 115 8147, 981 4071, 999 2809, 999 2917
Preparations
^
Remove wheel.
Removing brake caliper
^
Clean brake caliper carefully.
^
Remove protective cap from bleed nipple and open nipple.
