S70 L5-2.4L VIN 61 B5244S (2000)
-
the anti-roll bar mounting screws
-
the anti-roll bar
Installation
Install the new anti-roll bar
1. Install the screws with new nuts 2, 3.Use new screws and nuts Do not tighten the screws yet.
Install the transverse arm mounting onto the trailing arm with new screws and nuts
Install the inner screw (1) and nut. Adjust mounting as marked (2). Tighten the nut so that the position is fixed.
Install screw (3) and nut.
Tighten the nuts to 50 Nm (36.9 ft. lbs.) and angle tighten 120°.
Use bevel protractor 951 2050.
Tighten anti-roll bar mounting screws
