volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Stabilizer Bar, Sway Control|Front|Page 7105 > < Ball Joint/Steering Knuckle - Additional R&R Information|Page 7100
Page 1
background image

Stabilizer Bar: Service and Repair
Front

Special Tools

999 5006
999 5033
999 5460

Note! 

^

On early version cars the anti-roll bar bushings and cap can be replaced. On late versions the anti-roll bar bushings and cap are vulcanized into the
bar and are not replaceable.

^

The late version replaces the early version of the anti-roll bar.

Install the support rails 999 5033, mounting bracket 999 5006 and lifting hook 999 5460. Lift up the engine slightly

Note!  The following section applies to right-hand drive cars only.

Remove the collision protection system over the steering gear (2 screws)

Remove: 

Stabilizer Bar, Sway Control|Front|Page 7105 > < Ball Joint/Steering Knuckle - Additional R&R Information|Page 7100