S80 L6-2.9L VIN 92 B6294S2 (2004)
-
Raise the car
-
Remove the rear wheels
-
Carefully drill out the rivets on both sides. Use a 6 mm (15/64") diameter drill bit. Do not damage the plastic components.
-
Remove the bumper by pulling it straight backwards
-
Place the bumper on an underlay that will not damage the paint.
Remove:
-
the rivet (1) on the bracket (2) for the silencer. Use cutting nippers
-
the screws (3) on the bracket
-
the bracket by detaching the rubber mountings (4). The bracket will not be used again.