S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
-
Install the four screws in the subframe together with the sub-frame brackets. Use new screws. Lubricate the screws
-
First tighten the screws on the left-hand side of the sub-frame. Tighten to 105 Nm. Angle-tighten 120°. Then tighten the right-hand side to the
same values
-
Finally tighten the screws for the brackets on both sides to 50 Nm.
Finishing
Install
-
the right-hand engine mounting. Use new screws Tighten to 35 Nm. Angle-tighten 90°.
-
the vibration damper. Use new screws. Tighten to 35 Nm. Angle-tighten 90°. (Applies to cars with 6 cylinder engines.).
