S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Press the variable valve timing unit/ timing gear pulley onto the camshaft. Install the center screw (1) that holds the variable valve timing unit to the
camshaft. Do not tighten yet.
Slacken off, but do not remove the screws (2) which secure the timing gear pulley to the variable valve timing unit.
Position the upper timing cover.
Turn the timing gear pulley so that the screws at the oval holes are in the limit position. Continue turning clockwise until the timing gear pulley's marking
is 1 tooth before the marking on the upper timing cover.
