S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Check that the timing gear pulley is still in the limit position in the oval holes.
Tighten the center screw (1) in the VVT unit to 120 Nm.
Check that the variable valve timing unit does not rotate when tightening. Install the center plug and tighten to 35 Nm.
Install the belt pulley on the intake camshaft: Install the belt pulley on the intake camshaft with three screws; do not tighten yet.
Turn the timing gear pulley to the marking. Check that the markings on the timing gear pulley/ intake camshaft and upper timing cover correspond.
Installing The Timing Belt
Install the belt in the following order:
1. the belt pulley on the crankshaft
2. the idler pulley
3. cam wheel, intake camshaft
4. water pump
5. belt tensioner
