S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Position the motor.
Turn the shaft on the motor so that the motor can be positioned.
Install:
-
the screws
-
the switch
-
the glove compartment. See Glove compartment, replacing See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and
Repair.
Carry out self-adjustment of the damper motor end positions. This is carried out via VIDA communication.
Damper motor temperature driver's side, replacing
Removing the temperature damper motor, driver's side
