S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Accumulator HVAC: Service and Repair
Accumulator / receiver drier, replacing
Removal
Removing the drier
Remove the condenser. See Condenser, replacing See: Condenser HVAC/Service and Repair.
Remove:
-
the intermediate pipe according to: Pipe receiver drier, replacing See: Hose/Line HVAC/Service and Repair/Pipe Receiver Drier, Replacing
-
the pipe coupling from the condenser
-
the screw for the bracket
-
the drier / receiver.
Installing the receiver drier
Note! Always use new O-rings lubricated with compressor oil.
Position the receiver / dryer on the bracket and mount the pipe from the condenser.
Thread in the screw for the bracket.
Tighten the screw for the condenser-receiver/dryer's pipe coupling.
Tighten to 10 Nm
Tighten the screw for the bracket.
Tightening torque 25 Nm
Install the condenser according to: Condenser, replacing See: Condenser HVAC/Service and Repair.
