S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
If necessary, top up with oil in the AC-compressor.
Hold aside the cable channel and install the AC-compressor by inserting it between the sub-frame and body.
Install the screws, 4 pcs. M8, for the AC-compressor and tighten.
Note! Always use new O-rings lubricated with compressor oil.
Install:
-
AC-compressor's low and high pressure hoses. On certain vehicle models, it may be easier to install and tighten the screws from above
-
the magnetic clutch connector.
Install the cable channel on the sub-frame and bolt it down.
On certain versions the air channel is installed on the control module box and then on the sub-frame.
Installing the auxiliaries belt
MY 1999-2000:
Install the auxiliaries belt on the AC-compressor, see: Auxiliaries belt / belt tensioner, replacing See: Engine, Cooling and Exhaust/Engine/Drive Belts,
Mounts, Brackets and Accessories/Drive Belt Tensioner/Service and Repair.
MY 2001-2004