S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Remove:
-
the connector
-
the pressure sensor.
Installation
Installing the pressure sensor
Install:
-
the pressure sensor.
-
the connector.
Finishing
Note! For tightening torques, See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical Specifications/Tightening Torque.
Filling with coolant and leak tracing
Vacuum pump the air conditioning (A/C) system. See: Vacuum pumping See: Service and Repair/Vacuum Pumping.
Fill the system. See: Refrigerant, filling See: Service and Repair/Refrigerant, Filling
Leak trace the system. See: Leak tracing, fluorescent tracing agent / UV lamp See: Testing and Inspection/Component Tests and General
Diagnostics/Leak Tracing, Fluorescent Tracing Agent / UV Lamp or: Leak tracing, electronic leak tracer See: Testing and Inspection/Component Tests
and General Diagnostics/Leak Tracing, Electronic Leak Tracer.
Installing the air baffle
Install the 2 x M6 screws for the air baffle. Tighten. See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical Specifications/Tightening
Torque.