S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
-
the key
-
for first generation seats, see Lifting seats in and out See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat/Lifting
the Front Seats In and Out. For second generation seats, see Removing power seats, tilting See: Body and Frame/Seats/Service and
Repair/Removal and Replacement.
Ordering software
Order software according to the table below.
Finishing
Check that no diagnostic trouble codes have been stored during the repair.
Test operate the seat. Check all the functions.
Control Module Heater Pad, Replacing
Control module heater pad, replacing
Removing the heater pad control module
Remove the seat from the car. See Removing power seats, tilting See: Body and Frame/Seats/Service and Repair/Removal and Replacement.
Remove one screw.
Disconnect the connector.
Remove the control module.
Installing the heater pad control module
Install:
-
the control module
-
the connector