V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
After the tester has detected that the surface charge has gone, it will automatically carry out the test and display the results as described previously.
If the surface charge is not removed correctly, a warning window will be displayed, followed by a message. These two windows will be displayed for 3
seconds each, followed by an appropriate remedy as in windows 2 and 4 above.
If this sequence is repeated for more than 30 seconds, the following window will be displayed. The tester must then be disconnected from the battery,
reconnected and the test started from the beginning again.
Testing before or after charging
To obtain a more exact test result, the tester will ask if it is testing before or after charging. Select the correct alternative. Then press the ENTER button
(see the instruction card).
