V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Only apply the 1p varnish to the surrounding area (B).
Then immediately thereafter, apply the pearl varnish in approximately 2 spray coats. The number of coats depends on the result of the test spraying.
The first coat is sprayed on a smaller area (C), approximately 10 cm around the damaged area. The following coat is sprayed on the surrounding area
(B). The area around the damaged area that is sprayed is increased with each coat.
Air dry at room temperature for approximately 15 minutes between coats.
Spray a thin layer of 1p varnish on the surrounding area (B) only, to achieve a smoothing-out of the pearl varnish coat.
Immediately afterwards if required, spray a smaller area (C), approximately 10 cm surrounding the damaged area and on surrounding areas (B). Color
powder from the pearl varnish is absorbed by the 1p varnish coat.
Air dry for approx. 30 min at room temperature before the final application of 2p varnish.
2p Varnishing
Varnish the damaged surface and surrounding areas.
Exterior Plastic Components, 900
Exterior plastic components, 900
