V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Position the SIPS air bag on the backrest frame.
CAUTION: The air bag mounting screws must be replaced if the SIPS air bag was deployed. The new screws must be of the same type and quality as
the old.
NOTE: If the SIPS air bag has not activated.
-
Connect the connector to the seat frame.
-
Install the screws. Tighten to 3 Nm.
-
Secure the SRS ignition cable on the support in its original position.
Installing The Plastic Plate In The Backrest Frame