V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
-
the heat deflector plate in front of the output shaft. Tighten to 10 Nm
-
the support strut between the suspension turrets. Tighten to 55 Nm.
-
new oil filter.
-
the oil plug with a new gasket. Tighten to 35 Nm
-
dip stick with pipe. Use a new O-ring.
NOTE: Check that the O-ring is correctly positioned.
Fill with engine oil. Run the engine to operating temperature.
Check for oil leaks from the oil pan or oil cooler.
Install the front and rear splash guards under the engine
Check the oil level. Top up as necessary.
