V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
-
Press the oil pan against the transmission. Tighten the screws (1), (2), (3) and (4). Tighten to 3 Nm. Tighten the screws (5). First tighten to 25 Nm.
Then tighten to 48 Nm. Tighten all screws in the oil pan joint. Tighten to 17 Nm. Start at the transmission and continue forwards in pairs.
Applies to 98-model year only
Connect the oil cooler to the oil pan. Use four screws. Tighten to 17 Nm. Use new O-rings.
Installing the front-rear member
-
Install the front-rear member on the front engine mounting.
-
Press the engine forward. Secure the front-rear member on the rear engine mounting.
-
Install the front-rear member to the body. Use four screws. Tighten to 69 Nm.
-
Tighten the screws in the engine mountings. Tighten to 55 Nm.
Install:
