V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Camshaft Oil Seal: Procedures
Replacing The Camshaft Seals
Special Tools: 999 5006, 999 5383, 999 5460, 999 5452, 999 5651, 999 5451, 999 5199, 999 5718, 999 5719
NOTE:
-
As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the essential
information in the illustrations is always correct.
-
The crankshaft and camshafts must not be turned more than is stated in the method description.
If the shafts are turned in any other way the valves may be damaged.
Preparations
Remove:
-
the cable from the battery negative terminal.
-
the inlet hose between the air cleaner (ACL) and throttle body (TB). Place it to one side.
-
the brake servo vacuum hose from the terminal in the throttle body (TB). Disconnect the hose by pressing the plastic ring down. At the same time
pull the hose upwards. Move the hose to one side
-
the fuel line and wiring from the clips at the rear edge of the cylinder head.