V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Install:
-
the fuel rail and the injector nozzles. Press the quick-release connector together until it clicks. Use new screws. Tighten to 10 Nm
-
the vacuum hose for the fuel pressure regulator
-
the crankcase ventilation hose on the top of the cam cover. Use a new clamp
-
the connectors and protective cover for the injectors
-
the covers over the ignition coils and throttle body (TB).
Install the battery negative lead. First read Note when disconnecting and connecting the battery lead See: Starting and Charging/Battery/Service and
Repair/Procedures/Battery, Disconnecting.
Final check
Test drive the car. Check the following:
-
that there is no fuel leakage
-
that the engine operates normally.
Clean the engine compartment. Check that everything is in position.
Install the front engine cover if applicable.
