V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
-
Adjust the push rod on the pressure servo for the boost pressure control (BPC) valve if the values deviate from the above values.
-
Reset the air pressure before each test/adjustment.
NOTE: The push rod must be mounted on the lever when the lock-nut is adjusted.
-
The diaphragm in the pressure regulator will be damaged if the push rod is turned.
-
Tighten the lock nut on the push rod. Tighten to 9 Nm. Do not damage the membrane.
Reinstall/reconnect