V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Clockspring Assembly / Spiral Cable: Procedures
Steering Wheel Contact Reel
Preparations
Prepare the car.
Removing The Contact Reel
Remove:
-
the steering wheel module
-
the steering wheel.
Position the steering column in the lowest position.
Remove the upper cover from the steering column.
Disconnect the connector.
Remove the two screws.
Press the lock pin down.
Remove the contact reel.
Installing Contact Reel
Install:
-
the connector for the contact reel
-
the contact reel by pressing in the lock pin
-
the two screws. Tighten to 2.5 Nm.