V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Seat Belt Buckle: Procedures
Replacing The Seat Belt Buckle On The Front Seat
-
Remove the rear center console
-
Move the seat to its rearmost position.
-
Remove the mounting for the seat belt buckle. Disconnect the cable harness.
-
Clean the mounting point.
-
Install the new seat belt buckle. Tighten the new seat belt buckle. Tighten to 48 Nm.
-
Install the rear center console
Replacing Rear Seat Belt Buckles
-
Fold the seat cushion forward.
-
Remove the nuts. Remove the seat belt buckle.
NOTE: The mounting for the center belt is secured with a washer under the support on the left striker plate.
-
Install in reverse order.
-
Clean the mounting.
-
Apply locking fluid to the weld screws.
-
Tighten the nuts. Tighten to 48 Nm.