V50 L5-2.4L VIN 39 B5244S7 (2005)
Disconnect the lower mounting under the engine. Use a long extension rod. See the illustration.
Pull the exhaust pipe down through the right-hand wheel arch.
Installation
Installing the exhaust pipe for the engine coolant heater
Position the exhaust pipe. Carry out the work from the right-hand wheel arch.
Screw the nut into place loosely on the lower mounting. Do not tighten yet.
Install the fuel hose/pipe at the quick-release connector under the vehicle.
Secure the upper mounting. Tighten. See: Tightening torque See: Body and Frame/Specifications.
Position the intake hose.
Finishing
Installing components and testing the engine coolant heater
Install:
-
the right-hand front wheel
-
the lower mounting on the nut for the exhaust system. Tighten. See: Tightening torque See: Body and Frame/Specifications
-
the shield under the vehicle using the 7 clips.
Carry out a performance test of the engine coolant heater. See: Fuel-powered preheater, checking See: Testing and Inspection/Component Tests and
General Diagnostics/Fuel-Powered Preheater, Checking.
