V50 L5-2.4L VIN 39 B5244S7 (2005)
Remove:
-
the brackets on both sides of the climate control unit and the screws, 3 per bracket
-
the air duct
-
the 8 x screws for the cover.
Pull the cover at angle downwards/backwards.
Vehicles with split pipes. Refer to: Heat exchanger.
Note! The heat exchanger has pipes that are factory integrated. These pipes must be cut in order to remove the unit. The heat exchanger in the
service kit has separate pipes, however.
Place some paper below the pipe couplings to collect any spilled coolant.
Cut or saw off the pipes.
Press the pipes towards the firewall so that they protrude into the engine compartment.
Hint: To facilitate, also route the pipes from the engine compartment.
