V50 L5-2.4L VIN 39 B5244S7 (2005)
Remove the oil line (1) between the transmission cover and the oil cooler.
Hint: The quick-release connectors for the oil line are detached by pressing the clutch housing towards the cover/oil cooler. Hold the connection housing
in this position. Pull back the lugs on the connection housing. Pull the connector off the cover/oil cooler.
Connect a hose (2) to the return pipe sleeve connector on the cover. This hose is used to fill with oil.
Install a transparent plastic hose (3) on the oil cooler connecting sleeve, which runs down into a container.
Filling with transmission fluid
Apply the parking brake. Move the gear selector lever to position P.
Fill approximately 2 liters of oil through the hose connected to the transmission cover.
Start the engine. Allow the engine to idle so that the oil pump for the transmission pumps out the oil. Turn the engine off when air bubbles start to
become visible in the hose.
Fill approximately 2 liters of oil again as described above. Start the engine again. Allow the engine to idle so that the oil pump for the transmission
pumps out the oil. Turn the engine off when air bubbles start to become visible in the hose.
Further filling of transmission oil
