volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Communications Control Module|Testing and Inspection > < Audio Module (AUD)|Page 227
Page 40
background image

GPS Received position, latitude (Volvo On Call)

This parameter is used by phone modules (PHM) with Volvo On Call functionality.
The phone module (PHM) receives the signal from the global positioning system module (GPS).
This parameter displays the latitude of the last received position of the vehicle.
The phone module (PHM) transmits the signal together with other vehicle data when a Volvo On Call service is activated.

GPS Received position, longitude (Volvo On Call)

This parameter is used by phone modules (PHM) with Volvo On Call functionality.
The phone module (PHM) receives the signal from the global positioning system module (GPS).
This parameter displays the longitude of the last received position of the vehicle.
The phone module (PHM) transmits the signal together with other vehicle data when a Volvo On Call service is activated.

GSM signal strength (markets with GSM only)

This parameter indicates the signal strength for GSM phone modules (PHM). Measurement range 0 -31.
The value of the signal strength depends on the coverage and geographical location of the vehicle.
The value for normal coverage/reception should be approximately 20-25.

Power supply

The parameter indicates the power supply to the phone module (PHM).
The phone module (PHM) has a +30-supply.
Measurement range 0-66 V.
The normal value at ignition and with the engine running should be approximately 12 V (battery voltage).

Temperature unit

The parameter indicates the internal temperature in the phone module (PHM).
Measurement range -127 to 127 degrees C.

The normal temperature is approximately 70 degrees C but may vary depending on whether the air conditioning (A/C) or heater is in use.

Communications Control Module|Testing and Inspection > < Audio Module (AUD)|Page 227