V50 L5-2.4L VIN 39 B5244S7 (2005)
6.
Installation
Installing power steering pump
Install:
-
the power steering pump
-
the 3 screws. Tighten to 25 Nm /19 lb-Ft.
7.
Reinstall:
-
the return hose (1) with clamp to the pump reservoir
-
the delivery pipe to the power steering pump (2) and tighten to 30 Nm /23 Lb-Ft.
8.
Cable harness, conversion
Cut the cables of the larger connector at the front of the pump (large red and black cables). Isolate cut cables by wrapping with plastic tape.
9.
Removing cable terminals