V70 L5-2.4L VIN 55 B5254S (1998)
-
EVAP hose, press rubber hose over plastic hose at least 30 mm (1 3/16"),
-
install the clamp screw according to the illustration. Tighten clamp to 2.5 Nm (1.5 ft.lb).
Replacing Three-Way Union
16
Removing three-way union
-
Remove tank pressure sensor from tank.
-
Remove three-way union from tank pressure sensor (1).
-
Remove three-way union from EVAP hose (2).
-
Cut the connection between three-way union and tank. A =15 mm (9/16") from the end of the hose. Discard old three way union.
Do not slit the hose
17
Removal
