V70 L5-2.4L VIN 55 B5254S (1998)
^
Cut the boss off the roll-over valve.
18
Installing a new three-way union
Lubricate roll-over valve connection with part number 1161580.
Note!
The specified lubricant 1161580 MUST be used when installing the new hose over the old cut off end. The lubricant will have a certain adhesive
effect, while drying out, which ensures a tight seal.
Install:
-
Three-way union to roll-over valve (1) using clamp.
-
Three-way union to tank pressure sensor (2) using clamp. Turn the clamp so that it cannot interfere with anything.
-
Tank pressure sensor on tank.
-
Three-way union to EVAP hose (3).
-
Carefully pull lightly on hose to ensure that coupling is locked on fitting
Installing Fuel Tank
19
Installation