volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Interior Lighting Module|Locations|Page 581 > < Interior Lighting Module|Locations|Page 579
Page 2
background image

-

Remove the cover over the connector for the rear view mirror and control module.

-

Flip the anti-dazzle button toward the lens. Disconnect the connector in the rear view mirror and control module by pressing the catch through the
opening. Use a screwdriver

-

Remove the bulb holder together with the rear view mirror and control module.

Replacing the bulb holder in the rear view mirror unit
Installation

-

Connect the connector for the rear view mirror and control module

-

Reinstall the cover for the rear view mirror and control module connector

-

Connect the 2 connectors

-

Install the ground lead

-

Press the bulb holder into place

-

Install the 2 screws at the front edge

-

Install the lens.

HINT:  Only certain versions of the upper electronic module have a ground lead.

Replacing the switch for the interior lighting
Removal

-

Remove the lens.

-

Remove the bulb holder.

-

Remove the bulbs

-

Remove the screws

-

Remove the back piece from the switch

-

Detach and remove the printed circuit board and switch.

To replace the switch for the sun roof.

Replacing the switch for the interior lighting
Installation

-

In reverse order.

Replacing the rear view mirror (upper electronic module)

NOTE:  A rear view mirror with manual function cannot be replaced with automatic anti-dazzle or vice versa. The car will store diagnostic trouble codes

Interior Lighting Module|Locations|Page 581 > < Interior Lighting Module|Locations|Page 579