V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
Remove all relays and shunts bridged to the control module. Note the locations.
Release the catch on the rear. Use a screwdriver.
Lift and pull out the control module.
Check
Check that the control module's connectors are intact.
Installing the control module
-
Press the control module into place so that the catch on the rear engages
-
Position the connector. Carefully press the connector down.
Note! The pins are fragile. Check that the connector goes straight down into the control module.
-
Tighten the screw for the connector
-
Check that the connector cover is correctly positioned. Remedy if necessary
-
Install the relays and shunts. Note their locations
-
Install the integrated relay / fusebox. See Installing the integrated relay / fusebox in the cargo compartment.
Ordering software
Order applicable software.
Integrated Relay/Fusebox, Engine Compartment, Replacing
Integrated relay / fusebox in engine compartment
Exposing