V70 GL L5-2.4L VIN 55 B5254S (1998)
Alternator Pulley: Service and Repair
Pulley, replacing
Special tools: 951 2849 , 999 5760 , 951 2036
NOTE:
As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the
essential information in the illustrations is always correct. On five cylinder models, the pulley can be replaced with the generator (GEN)
still installed in the vehicle.
Removal
Preparatory work
Switch off the ignition and remove the key.
Disconnect the auxiliaries belt according to Repacing the Auxiliaries Belt/Belt Tensioner, refer to Engine, Cooling and Exhaust - Engine -
Drive Belts, mounts, Brackets and Accessories - Drive Belt - Service and Repair - Procedures See: Engine, Cooling and
Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair
Removing a pulley without freewheel
NOTE:
The rotor shaft is left-hand threaded. Remove the pulley and the nut. Use ring wrench 951 2036 and twelve point socket 951 2849.
Removing a pulley with freewheel
