V70R L5-2.5L Turbo VIN 52 B5254T4 (2007)
-
Insert a plastic weatherstrip tool between the weatherstrip and the clips. Bend the tab down further on the clips to ensure that the clips are secure.
Note! Do not damage the paint work.
-
Remove the protective film from the headlamp guard (from the kit).
Applies to cars without headlamp washers
-
Position the headlamp guard opposite the headlamp.
Applies to cars with headlamp washers
-
Fold the headlamp washer out
-
Position the headlamp guard so that the cut out in the lower edge is opposite the two stops (4) for the headlamp washer.
Applies to all cars
-
Hook the headlamp guard into place in the holes (1) in the lower edge of the two clips (2). These clips slide sideways to suit the holes in the
headlamp guard
-
Fold up the headlamp guard towards the mounting strip (3).
Note! Ensure that the stop does not catch the headlamp guard when folding it upwards on cars with headlamp washers. Lift the guard slightly
so that the stop is positioned in the cut out.
