V70R L5-2.5L Turbo VIN 52 B5254T4 (2007)
Headlamp Cover: Service and Repair
Headlamp guard
Installation
-
Open the bonnet
-
Clean the headlamp lens
-
Take the mounting strips for the headlamp guards from the kit
-
Pry up the weatherstrip for the headlamp. Use a plastic weatherstrip tool
-
Insert the mounting strip between the top of the headlamp and the weatherstrip. Position the mounting strip as illustrated.
-
Remove the two clips from the kit. Check that the tab (1) is angled a few millimetres below the other surface. If it is not, bend the tab down as
illustrated.
-
Press the two clips into the gap between the lower edge of the headlamp and the weatherstrip, approximately at the point illustrated. Use the
headlamp guard as a template.