volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Relays and Modules - Transmission and Drivetrain > < M56 Transmission|Page 15177
Page 13
background image

Check that the gear selector lever is in neutral.
Install the inner gear selector cable on the lever. Press into place by hand.
Press the adjuster into place so that it is locked on the mechanical cable

Installing the air cleaner (ACL) housing

Install the air cleaner (ACL) housing, including all hoses and electrical terminals.

Note! Applies to certain versions.

Install the dirt guard over the drive shaft and the 2 plastic nuts for the fender liner.

Fitting the wheel

Install the wheel. See Installing wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair.

Final check

Check that the gear positions are working.

Relays and Modules - Transmission and Drivetrain > < M56 Transmission|Page 15177