V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
Oil Separator: Service and Repair
OIL TRAP SEAL REPLACEMENT
Remove Intake Manifold
^
Remove the intake manifold.
Remove:
^
Hose from oil trap.
^
Intake manifold bracket.
^
Two oil trap screws.
^
Oil trap.
^
Check that oil trap seal surfaces are clean.
Install Oil Trap
^
Connect two oil trap hoses to engine block connecting sleeve.
^
Install upper hose with a new hose clamp and tighten lower hose.
^
Install and tighten screws to 20 Nm (14.8 ft lb).
^
Install intake manifold bracket, finger tighten lower screw.
