V90 L6-2.9L VIN 96 B6304S (1998)
1. Connect hose to upper nipple and repeat as above.
2. Fit protective cover(s) to nipple(s).
3. Bleed other brake caliper as above.
BLEEDING REAR BRAKE CALIPER
The picture shows bleeding a brake caliper on a car with a rigid rear axle.
1. Remove protective cover from bleed nipple.
NOTE: On cars with multi-link rear axles, use upper brake bleed nipple.
2. Open bleed nipple and close again once emerging fluid seems to be free of air bubbles.
3. Tighten nipple.
4. Fit protective cover to bleed nipple.
5. Bleed other brake caliper as above.