volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Sill Moulding|Page 15027 > < Sill Moulding|Page 15025
Page 10
background image

-

Remove the blank seal washer on the inside of the door sill.

Continue with previous steps 2-4 on the car's other side during the time that the rustproofing dries.

A

-

Remove the dashboard's end panel on the right side by carefully twisting it (1) using a weatherstrip tool until the two catches release and then pull
it backwards (2).

B

-

If the car has a passenger airbag, unplug the connector for the switch.

Sill Moulding|Page 15027 > < Sill Moulding|Page 15025