volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Sill Moulding|Page 15028 > < Sill Moulding|Page 15026
Page 11
background image

-

Remove the sill panel in the front door by first carefully prying it off at the front edge, then pull it up until the three clips release. Then, pull it
away forwards at an angle.

-

Remove the rubber strip in the front edge of the door opening by the lower A-pillar panel on the right side.

-

Remove the lower A-pillar panel by the right front door by first pulling it up at the rear edge until the clip there releases. Then pull it back further
until the clip on the centre releases. Then pull it away diagonally down from the upper A-pillar panel.

-

Continue with previous steps 10-13.

Sill Moulding|Page 15028 > < Sill Moulding|Page 15026