XC60 FWD L6-3.2L VIN 96 B6324S2 (2010)
-
Place a strip of tape in the front edge of the sill panel, and square to the edge of the door sill.
-
Position the sill moulding by the strip of tape at the front edge and position it so that the cut-outs in both ends align with the corresponding door
sill. Be careful when positioning so that the moulding is not misaligned.
-
Attach a strip of tape to mark the sideways position.
-
Clean the marked surface on the sill using isopropanol and wipe dry.
