XC60 FWD L6-3.2L VIN 96 B6324S2 (2010)
-
Remove all the pieces of protective tape from the sill moulding.
-
Align the moulding with the tape markings and carefully fold it down against the sill and push into position. Watch out for the rubber moulding in
the sill.
-
Remove the tape markings.
-
Now press along the entire strip so that it fastens properly.
-
Press the moulding strip down firmly with a pressure of 2 kg/cm2 along its entire length.
-
Repeat the operation on the other side.