XC60 FWD L6-3.2L VIN 96 B6324S2 (2010)
Lubricate the edges of the new seal using automatic transmission fluid.
999 5769 Pilot See: Tools and Equipment/999 5769 Pilot.
Install the seal to the locating pin. 999 5771 Drift See: Tools and Equipment/999 5771 Drift.
Tap in the seal until the drift is against the transmission.
Remove the locating pin.
Install the drive shaft. Refer to: Drive shaft right, B6324S, TF-80SC See: Axle Shaft Assembly/Service and Repair/Drive Shaft Right.
Check the oil level. Refer to: Transmission oil level - checking, B6324S, TF-80SC AWD, B6324S, TF-80SC See: Automatic
Transmission/Transaxle/Service and Repair/Procedures/Transmission Oil Level - Checking.
