XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
passenger compartment connector socket as possible.
-
Take a carpet knife and cut a slit in the carpet just in front of the locking sleeve. Make the cut as long as the diameter of the locking sleeve.
Note! Do not damage any wiring and hoses under the carpet.
-
Remove the passenger compartment connector socket from the bracket and fold the carpet to one side.
-
Thread the cable through the hole in the carpet.
-
Grease in the O-ring with low temperature grease (part no. 1161417-9).
Note! Ensure that no grease gets onto the connector surfaces.
-
Connect the cable to the passenger compartment connector socket. Press a locking sleeve (from the kit) over the joint.
-
Fold the carpet back into position and install the passenger compartment connector socket using both the screws.
-
Reinstall the sound barrier, the centre console's side panel and sill moulding.
