volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Pulse Wheel Drive Shaft, Replacing|Page 1889 > < Pulse Wheel Drive Shaft, Replacing|Page 1887
Page 2
background image

Remove:

-

the 8 seat frame screws (1)

-

the 8 seat frame screws (2).

Raise the rear edge of the seat frame approximately 25 mm. Position a block (3) between the frame and the transmission tunnel.

Removing the cap over the level sensor

Pulse Wheel Drive Shaft, Replacing|Page 1889 > < Pulse Wheel Drive Shaft, Replacing|Page 1887