Flywheel: Service and Repair
- Make
- Acura (Honda)
- Model
- CL 3.2CL
- Engine
- V6-3.2L SOHC
- Year
- 2003
- Section
- Flywheel › Service and Repair
Transmission and DrivetrainService and Repair
Flywheel: Service and Repair
Removal and Installation
Special Tool Required
-
Ring Gear Holder 07LAB-PV00100
1. Remove the transmission.
2. Remove the eight flywheel bolts, then separate the flywheel form the crankshaft flange. After installation, tighten the bolts in the sequence shown.
3. Install the transmission.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 2003 Acura CL 3.2L
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Acura CL
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.